[Usagi Electric] is breathtakingly close to having his Bendix G15 vacuum tube computer up and running. This week he is joined by a new friend, [Lloyd] who is restoring a G15 as well. [Lloyd] used to repair the Bendix Computers back in the 1970s, so he’s privy to lots of practical knowledge you can’t find in the manuals.
The goal this week was to apply DC power to the G15. The AC power spins the fans and makes the tubes start glowing. But DC makes the magic happen. That’s when the boot sequencers start running, sending data to the drum, testing various parts of the machine, and finally, loading software from the paper tape reader.
Since this was a computer from the 1950’s, powering up DC might work, or could let the magic smoke out. The only way to find out was to push the big green “Reset” button.
The first attempt was stymied by a blown fuse. The second attempt resulted in real live blinkenlights. The data and status lights on the Bendix lit up for the first time in decades. The only thing missing was the sound of the tape drive. A bit of digging proved that the problem wasn’t in the computer, but in the typewriter user console. The typewriter supplies -20 volts DC to the Bendix. Since that voltage wasn’t getting to the computer, the boot process halted.
Unfortunately, the typewriter has “somebody’s been here before” syndrome – in addition to age, there are a number of odd modifications. It’s going to take [Usagi] a bit of time to dig into it and figure out what’s wrong.
The good news is ..
Support the originator by clicking the read the rest link below.
